Double Skin Steel Partitioning
The double skin steel partitioning system is suitable for a wide range of applications including offices, storage areas and factory dividing walls.
The system is quick and easy to construct and has a comprehensive range of single, double and sliding doors available. These can be fitted with most types of locks and latches, including interlocks.
Double Skin Systems
Double skin steel panels sit into a floor channel and lock into adjacent panels by means of a `H` post making installation fast, simple and secure.
Europa 2’s standard range comes with a wide variety of width options. However, standard configurations do not always fit into required spaces. Therefore the non-standard or bespoke design is always an option.
Europa 2 is also available in various vertical configurations – all solid, solid/glass/solid or steel and glass.
Panels are constructed from 18g cold rolled channels and faced with 0.8mm (21g) CR4 mild steel sheets and with a 30mm Rockwool slab in#ll. Panels are connected to each other by the means of a `H` section, making the installation very quick and simple. The `H` post also o!ers additional rigidity.
All solid, half glazed, solid/glass/solid and borrowed light.
Standard Panel Sizes
Height: 2400, 2700, 3000mm, Width: 1000mm
Dado, Height: 1200mm, Thickness: 47mm
Standard Door Modules (steel/timber)
Single Door: 2022mm width 1000mm – plus over panel
Double Door 2022mm width 1940mm – plus over panel
Sliding Door: To suit project requirement
Glass is mounted on a foam strip and held in place by a steel glazing bead. 6.4mm laminated
Glass is standard, although toughened and Perspex can be supplied. Double glazed panels can be supplied using a 14mm sealed unit with 2 x 4mm toughened glass.
All panels and components are electro statically powder-coated under quality controlled conditions
Grey 10 A 07
Grey 00 A 05
Sandstone 08 B 17
Non standard colours can be accommodated.