Double Skin Steel Partitioning Overview
The double skin steel partitioning system is suitable for a wide range of applications including offices, storage areas and factory dividing walls.
The system is quick and easy to construct and has a comprehensive range of single, double and sliding doors available. These can be fitted with most types of locks and latches, including interlocks.
Double skin steel panels sit into a floor channel and lock into adjacent panels by means of a `H` post making installation fast, simple and secure. Europa 2’s standard range comes with a wide variety of width options. However, standard configurations do not always fit into required spaces. Therefore the non-standard or bespoke design is always an option. Europa 2 is also available in various vertical configurations – all solid, solid/glass/solid or steel and glass.
Panels are constructed from 18g cold rolled channels and faced with 0.8mm (21g) CR4 mild steel sheets and with a 30mm Rockwool slab infill. Panels are connected to each other by the means of a `H` section, making the installation very quick and simple. The `H` post also offers additional rigidity.
All solid, half glazed, solid/glass/solid and borrowed light.
Standard Panel Sizes
- Height: 2400, 2700, 3000mm
- Width: 1000mm
- Thickness: 47mm
Non standard widths and heights can be accommodated to order
Standard Door Modules in either steel or timber
- Single Door: 2022mm width 1000mm – plus over panel
- Double Door 2022mm width 1940mm – plus over panel
- Sliding Door: To suit project requirement
Glass is mounted on a foam strip and held in place by a steel glazing bead. 6.4mm laminated
Glass is standard although toughened glass and Perspex can be supplied. Double glazed panels can be supplied using a 14mm sealed unit with 2 x 4mm toughened glass.
All panels and components are electro statically powder-coated under quality controlled conditions
- Grey 10 A 07
- Grey 00 A 05
- Sandstone 08 B 17
Non standard colours can be accommodated.